Updating a built in dresser Free sites to find kinky chat
Finish by washing down the dresser and letting it dry out.STAIN To remove existing stain from the dresser, just as above, use sandpaper or a power sander. As the bare wood starts to show through, switch to medium-grit sandpaper. The sandpaper actually does double duty: It removes the old stain while also preparing the bare wood to accept a new finish.Working with such a product absolutely requires good ventilation and proper protective gear.Instructions vary from product to product, but the process generally starts with a thorough cleaning.There is no right or wrong here, and the answer, of course, is entirely up to you.Heed your personal style preferences, and consider the decor already ensconced in the room where you plan to use the refinished dresser.In hard-to-reach crannies, swap the sandpaper for a scraper or steel wool.It’s not necessary to take off every single speck of paint, but the closer you can get to bare wood, the better.
Bring the dresser to an area where you can make a mess, and to facilitate cleanup, position the dresser over a tarp. PAINT Use sandpaper—or to make quicker work of things, a power sander—to remove the paint, or layers of paint as the case may be. All you need to be successful in the task are two things: a free afternoon and the willingness to get your hands a little sawdusty. If not, then you’re very likely dealing with paint. Give it a second look, and this time try to see past its paint job or cracked coat of stain. Indeed, anybody can learn how to refinish a dresser; there are no special tools or advanced skills required. what furniture refinishing means—taking off the finish that’s worse for wear (or whose aesthetics you’re not too fond of). How you go about removing the existing finish depends on whether the dresser is now sporting paint or stain. If you see any wood grain, that means there’s a stain.After sanding, wipe the piece down with a tack cloth to pick up sawdust.